10G SFP+ Transceiver 1310nm 10 km Duplex LC
Juniper QFX-SFP-10GE-LR compatible SFP+ transceiver supports up to 10 km over SMF via a LC Duplex connector. This transceiver is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae standards for seamless interoperability in multi-vendor environments. Digital diagnostics monitoring (DDM) is available via a 2-wire serial interface, as specified in SFF-8472. It features a DFB (Distributed Feedback) laser transmitter and a 6.2 dB link power budget, with support for 10G Ethernet, 10G FC and 8G Fibre Channel. Featuring low power consumption and reliable performance, this 10GBASE SFP+ transceiver is ideal for data center, enterprise wiring closet and service provider transport applications.
| FORM FACTOR | SFP+ | BANDWIDTH FROM | 600 Mbit/s |
|---|---|---|---|
| CONNECTOR | LC Duplex | BANDWIDTH TO | 11.3 Gbit/s |
| INTERFACE | Singlemode | LASER | DFB |
| WAVELENGTH TX | 1310 nm | RECEIVER TYPE | PIN |
| WAVELENGTH RX | 1310 nm | WAVELENGTH TX MIN. | 1270 nm |
| DISTANCE | 10 km | WAVELENGTH TX MAX. | 1355 nm |
| POWERBUDGET (DB) | 6.2 dB | WAVELENGTH RX MIN. | 1260 nm |
| TRANSMIT MIN. | -8.2 dBm | WAVELENGTH RX MAX. | 1565 nm |
| RECEIVE MIN. | -14.4 dBm | TEMPERATURE RANGE | 0°C - 70°C |
| TRANSMIT MAX. | 0.5 dBm | DIGITAL DIAGNOSTIC MANAGEMENT (DDM) | internally calibrated |
| RECEIVE MAX. (RECEIVER OVERLOAD) | 0.5 dBm | TYPE | LR |
| PART NUMBER | SFP-10G-LR | EXTINCTION RATIO | 3.5 dB |
| PROTOCOLS | 10G Ethernet, 10G FC, 8G Fibre Channel, LTE 7.373G CPRI, LTE 9.830G CPRI, Gigabit Ethernet, LTE 6.144G OBSAI, LTE 6.144G CPRI, LTE 4.915G CPRI, LTE 3.072G OBSAI, LTE 2.458G CPRI, LTE 1.536G OBSAI, LTE 1.22G CPRI, LTE 0.768G OBSAI, LTE 0.614G CPRI |
Every Unoptix transceiver is factory pre-programmed and tested in our lab before shipment, so it's ready to work the moment it's installed - no manual configuration required. Our team draws on years of multi-vendor optics experience and is on hand if you need help matching a module to your equipment.
Fully certified to meet strict international safety and quality standards for the industry.
Please note: installing a third-party transceiver does not void your network equipment's warranty. Equipment manufacturers' own guidelines state that warranty support is not affected by using compatible optics.
Enhance your network with Unoptix’s
cost-effective, high-quality optical solutions.
Copyright © Unoptix LTD 2026 | All rights reserved.