1G SFP Transceiver 850nm 550 m Duplex LC
DELL 320-2881 compatible SFP transceiver supports up to 550 m over MMF via a LC Duplex connector. This transceiver is compliant with SFF-8472 and IEEE 802.3z standards for seamless interoperability in multi-vendor environments. Digital diagnostics monitoring (DDM) is available via a 2-wire serial interface, as specified in SFF-8472. It features a VCSEL transmitter and a 7.5 dB link power budget, with support for 1G Fibre Channel and Gigabit Ethernet. Featuring low power consumption and reliable performance, this 1000BASE SFP transceiver is ideal for enterprise access switching and wiring closet uplinks.
| FORM FACTOR | SFP | BANDWIDTH FROM | 1.05 Gbit/s |
|---|---|---|---|
| CONNECTOR | LC Duplex | BANDWIDTH TO | 1.25 Gbit/s |
| INTERFACE | Multimode | LASER | VCSEL |
| WAVELENGTH TX | 850 nm | RECEIVER TYPE | PIN |
| WAVELENGTH RX | 850 nm | WAVELENGTH TX MIN. | 830 nm |
| DISTANCE | 550 m | WAVELENGTH TX MAX. | 860 nm |
| POWERBUDGET (DB) | 7.5 dB | WAVELENGTH RX MIN. | 760 nm |
| TRANSMIT MIN. | -9.5 dBm | WAVELENGTH RX MAX. | 860 nm |
| RECEIVE MIN. | -17 dBm | TEMPERATURE RANGE | 0°C - 70°C |
| TRANSMIT MAX. | -3 dBm | DIGITAL DIAGNOSTIC MANAGEMENT (DDM) | internally calibrated |
| RECEIVE MAX. (RECEIVER OVERLOAD) | -3 dBm | TYPE | SX |
| PART NUMBER | SFP-1G-SX | EXTINCTION RATIO | 0dB |
| PROTOCOLS | 1G Fibre Channel, Gigabit Ethernet |
Every Unoptix transceiver is factory pre-programmed and tested in our lab before shipment, so it's ready to work the moment it's installed - no manual configuration required. Our team draws on years of multi-vendor optics experience and is on hand if you need help matching a module to your equipment.
Fully certified to meet strict international safety and quality standards for the industry.
Please note: installing a third-party transceiver does not void your network equipment's warranty. Equipment manufacturers' own guidelines state that warranty support is not affected by using compatible optics.