
1G SFP BiDi Transceiver 1310nm/1550nm 40 km LC
Extreme 10057-EX compatible SFP transceiver supports up to 40 km over SMF via a LC Simplex connector. This transceiver is compliant with SFF-8472 and IEEE 802.3z standards for seamless interoperability in multi-vendor environments. Digital diagnostics monitoring (DDM) is available via a 2-wire serial interface, as specified in SFF-8472. It features a DFB (Distributed Feedback) laser transmitter and a 20 dB link power budget, with support for 1G Fibre Channel, Gigabit Ethernet and Fast Ethernet. Featuring low power consumption and reliable performance, this 1000BASE SFP transceiver is ideal for enterprise access switching and wiring closet uplinks.
| FORM FACTOR | SFP | BANDWIDTH FROM | 125 Mbit/s |
|---|---|---|---|
| CONNECTOR | LC Simplex | BANDWIDTH TO | 1.25 Gbit/s |
| INTERFACE | Singlemode BiDi | LASER | DFB |
| WAVELENGTH TX | 1310 nm | RECEIVER TYPE | PIN |
| WAVELENGTH RX | 1550 nm | WAVELENGTH TX MIN. | 1290 nm |
| DISTANCE | 40 km | WAVELENGTH TX MAX. | 1330 nm |
| POWERBUDGET (DB) | 20 dB | WAVELENGTH RX MIN. | 1480 nm |
| TRANSMIT MIN. | -3 dBm | WAVELENGTH RX MAX. | 1580 nm |
| RECEIVE MIN. | -23 dBm | TEMPERATURE RANGE | 0°C - 70°C |
| TRANSMIT MAX. | 2 dBm | DIGITAL DIAGNOSTIC MANAGEMENT (DDM) | internally calibrated |
| RECEIVE MAX. (RECEIVER OVERLOAD) | -3 dBm | TYPE | BiDi EX |
| PART NUMBER | SFP-1G-BX40-U | EXTINCTION RATIO | 8.2 dB |
| PROTOCOLS | 1G Fibre Channel, Gigabit Ethernet, Fast Ethernet |
Every Unoptix transceiver is factory pre-programmed and tested in our lab before shipment, so it's ready to work the moment it's installed - no manual configuration required. Our team draws on years of multi-vendor optics experience and is on hand if you need help matching a module to your equipment.
Fully certified to meet strict international safety and quality standards for the industry.
Please note: installing a third-party transceiver does not void your network equipment's warranty. Equipment manufacturers' own guidelines state that warranty support is not affected by using compatible optics.