100G QSFP28 Transceiver 4x 850nm 300 m MTP/MPO
Dell QSFP28-100G-SR4 compatible QSFP28 transceiver supports up to 300 m over MMF via a MTP/MPO-8/12 PC connector. This transceiver is compliant with SFF-8636 and IEEE 802.3bm standards for seamless interoperability in multi-vendor environments. Digital diagnostics monitoring (DDM) is available via a 2-wire serial interface, as specified in SFF-8472. It features a VCSEL transmitter, with support for 100G Ethernet. Featuring low power consumption and reliable performance, this 100GBASE QSFP28 transceiver is ideal for high-density spine and hyperscale data center interconnects.
| PART NUMBER | QSFP-100G-ESR4-S | FORM FACTOR | QSFP28 |
|---|---|---|---|
| CONNECTOR | MTP/MPO-8/12 PC | INTERFACE | Multimode |
| COMPLIANCE CODE | ESR4 | DISTANCE | 300 m |
| TEMPERATURE RANGE | 0°C - 70°C | LANE COUNT | 4x (Tx/Rx) |
| BANDWIDTH | 103.13 Gbit/s | BANDWIDTH PER LANE | 25.78 Gbit/s |
| DIGITAL DIAGNOSTIC MANAGEMENT (DDM) | internally calibrated | POWER CONSUMPTION | 3.5 W |
| CDR | TX and RX | SGMII | No |
| INBUILT FEC | No | POWER BUDGET | 1.9 dB |
| TRANSMIT MIN/MAX PER LANE | -8.4 dBm / 2.4 dBm | RECEIVER MIN/MAX PER LANE | -10.3 dBm / 2.5 dBm (overload) @100G |
| WAVELENGTH TX (TYPICAL) | 4x 850 nm | WAVELENGTH TX (RANGE) | 840 - 860 nm |
| WAVELENGTH RX (TYPICAL) | 4x 850 nm | LASER | VCSEL |
| RECEIVER TYPE | PIN | MODULATION | NRZ @100G |
| TRANSMIT AND DISPERSION PENALTY | 4.6 dB | EXTINCTION RATIO | 2 dB |
| PROTOCOLS | 100G Ethernet |
Every Unoptix transceiver is factory pre-programmed and tested in our lab before shipment, so it's ready to work the moment it's installed - no manual configuration required. Our team draws on years of multi-vendor optics experience and is on hand if you need help matching a module to your equipment.
Fully certified to meet strict international safety and quality standards for the industry.
Please note: installing a third-party transceiver does not void your network equipment's warranty. Equipment manufacturers' own guidelines state that warranty support is not affected by using compatible optics.