100G QSFP28 Transceiver 4x 1310nm 2 km MTP/MPO
Cisco Systems QSFP-100G-PSM4-S compatible QSFP28 transceiver supports up to 2 km over SMF via a MTP/MPO-8/12 APC connector. This transceiver is compliant with SFF-8636 and IEEE 802.3bm standards for seamless interoperability in multi-vendor environments. Digital diagnostics monitoring (DDM) is available via a 2-wire serial interface, as specified in SFF-8472. It features a DFB (Distributed Feedback) laser transmitter, with support for 100G Ethernet. Featuring low power consumption and reliable performance, this 100GBASE QSFP28 transceiver is ideal for high-density spine and hyperscale data center interconnects.
| PART NUMBER | QSFP-100G-PSM4-S | FORM FACTOR | QSFP28 |
|---|---|---|---|
| CONNECTOR | MTP/MPO-8/12 APC | INTERFACE | Singlemode |
| COMPLIANCE CODE | PIR4 | DISTANCE | 2 km |
| TEMPERATURE RANGE | 0°C - 70°C | LANE COUNT | 4x (Tx/Rx) |
| BANDWIDTH | 103.12 Gbit/s | BANDWIDTH PER LANE | 25.78 Gbit/s |
| DIGITAL DIAGNOSTIC MANAGEMENT (DDM) | internally calibrated | POWER CONSUMPTION | 3.5 W |
| CDR | TX and RX | SGMII | No |
| INBUILT FEC | No | POWER BUDGET | 8 dB |
| TRANSMIT MIN/MAX PER LANE | -4 dBm / 2 dBm | RECEIVER MIN/MAX PER LANE | -12 dBm / 3 dBm (overload) @100G |
| WAVELENGTH TX (TYPICAL) | 4x 1310 nm | WAVELENGTH TX (RANGE) | 1260 - 1355 nm |
| WAVELENGTH RX (TYPICAL) | 4x 1310 nm | LASER | DFB |
| RECEIVER TYPE | PIN | MODULATION | NRZ @100G |
| EXTINCTION RATIO | 3.5 dB | PROTOCOLS | 100G Ethernet |
Every Unoptix transceiver is factory pre-programmed and tested in our lab before shipment, so it's ready to work the moment it's installed - no manual configuration required. Our team draws on years of multi-vendor optics experience and is on hand if you need help matching a module to your equipment.
Fully certified to meet strict international safety and quality standards for the industry.
Please note: installing a third-party transceiver does not void your network equipment's warranty. Equipment manufacturers' own guidelines state that warranty support is not affected by using compatible optics.
Enhance your network with Unoptix’s
cost-effective, high-quality optical solutions.
Copyright © Unoptix LTD 2026 | All rights reserved.