100G QSFP28 Transceiver 1271/1291/1311/1331nm 2 km LC
Brocade 100G-QSFP28-CWDM4-2KM compatible QSFP28 transceiver supports up to 2 km over SMF via a LC-Simplex APC connector. This transceiver is compliant with SFF-8636 and IEEE 802.3bm standards for seamless interoperability in multi-vendor environments. Digital diagnostics monitoring (DDM) is available via a 2-wire serial interface, as specified in SFF-8472. It features a DFB (Distributed Feedback) laser transmitter, with support for 100G Ethernet. Featuring low power consumption and reliable performance, this 100GBASE QSFP28 transceiver is ideal for high-density spine and hyperscale data center interconnects.
| PART NUMBER | QSFP-100G-CWDM4-S | FORM FACTOR | QSFP28 |
|---|---|---|---|
| CONNECTOR | LC-Simplex APC | INTERFACE | Singlemode BiDi |
| COMPLIANCE CODE | BiDi CWDM4 | DISTANCE | 2 km |
| TEMPERATURE RANGE | 0°C - 70°C | LANE COUNT | 4x (Tx/Rx) |
| BANDWIDTH | 103.12 Gbit/s | BANDWIDTH PER LANE | 25.78 Gbit/s |
| DIGITAL DIAGNOSTIC MANAGEMENT (DDM) | internally calibrated | POWER CONSUMPTION | 3.5 W |
| CDR | TX and RX | SGMII | No |
| INBUILT FEC | No | POWER BUDGET | 5 dB |
| TRANSMIT MIN/MAX PER LANE | -6.5 dBm / 2.5 dBm | RECEIVER MIN/MAX PER LANE | -11.5 dBm / 2.5 dBm (overload) @100G |
| WAVELENGTH TX (TYPICAL) | 1271 nm, 1291 nm, 1311 nm, 1331 nm | WAVELENGTH RX (TYPICAL) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
| LASER | DFB | RECEIVER TYPE | PIN |
| MODULATION | NRZ @100G | TRANSMIT AND DISPERSION PENALTY | 3 dB |
| EXTINCTION RATIO | 3.5 dB | PROTOCOLS | 100G Ethernet |
Every Unoptix transceiver is factory pre-programmed and tested in our lab before shipment, so it's ready to work the moment it's installed - no manual configuration required. Our team draws on years of multi-vendor optics experience and is on hand if you need help matching a module to your equipment.
Fully certified to meet strict international safety and quality standards for the industry.
Please note: installing a third-party transceiver does not void your network equipment's warranty. Equipment manufacturers' own guidelines state that warranty support is not affected by using compatible optics.
Enhance your network with Unoptix’s
cost-effective, high-quality optical solutions.
Copyright © Unoptix LTD 2026 | All rights reserved.